Over the past five years we've sold thousands of flashes! A quality flash dryer
is so important to the screen printing process! Not only are you relying on this
piece of equipment to insure that you provide your customer a shirt that will not
washout, but it's electrical and heats up to over 500 degrees so if something goes
wrong due to cheap parts it usually doesn't turn out very well. Ryonet's excited
to partner with BBC Industries to manufacture our very own "Econo Flash".
BBC has been manufacturing heating elements for over 60 years and makes some of
the best quality products in the industry. They manufacturer from the ground up
and insure premium quality that is built for life! We've combined everything we
would like in a starter flash dryer with BBC's manufacturing genius and unparallel
support to provide a consistent, affordable, and durable flash dryer to our customers
just starting to screen print.
Check out these specs!
- 16x16" 1600 Watt Infrared Element - most flash dryers
in this price range use coil elements like you would see in an oven.
An infrared element uses a panel with hundreds of wires flowing
through it to provide consistent heat throughout the heating area.
A coil element only emits heat from one coil so you have very hot
spots and very cool spots which doesn't behoove a constant cure.
- Rotating and Adjustable Stand.
- Sturdy design with powder coated housing to prevent rust.
- Locking casters.
- Simple design - with few parts there are a fewer things
to go wrong. The Econo Flash doesn't have an on/off switch
but can easily be plugged into the wall or hooked up to an industrial
power strip to turn on and off.
- Easy assembly - yes, there is some assembly required,
but with a few bolts you have a flash that's ready to be put to
work. "That was easy!"
- UL certified components.
- Runs off any 15amp circuit.
- 1 year warranty - if a one year warranty seams short
picture this. The element used in this flash dryer is the SAME element
used it BBC's high end series. These elements have been tried and
tested in thousands of shops throughout the world. Their quality
and longevity speaks for itself and dwarfs any manufacturer's warranty!
Ryonet's 16x16 Econo Flash, 120V, 1575W, 13.3 amps
The Econo Flash is a great quality affordable flash dryer to get
into. This 16x16" version features almost 1600 watts of power. The
flash dryer is simply and effectively constructed to insure the
least amount of problems and the longest lifespan. It has a 10 Ft
Power Cord with plug, stand, and casters for easy maneuverability
around the shop.
This low cost setup satisfies the basic requirements for start-ups
or can serve as a back up system. The Econo Flash does NOT have
an indicator light or on/off switch. However, it usually warms up
in about 10-15 minutes and you can easily tell if its on or off
by simply feeling under the flash for warmth. Also a heavy duty
power strip can be added easily to suffice as an on/off switch.
This dryer comes with a 1 year warranty against electrical component
failure.
Product Support Information
Instructions on how to cure with a Flash Dryer
Cart
Log-in
Account
Support
