|
Color Matching UltraMix® 7400 Color System by IC Ink
$525.99
Bring the ultimate rainbow of color into your shop and to your customers. With a color matching system you can specifically match almost any color your customer wants or you need. You complete control. Also, if you have a matching system you never have to worry about running out of ink because you can also mix more. A color matching system is great for any screen printing shop small or large. The UltraMix® 7400 Color System is economically priced and easy to use, UltraMix®7400 inks offer faster wet-on-wet production speeds with less pressure and extremely low ink build-up. The color matching system consists of 15 intermixable colors that enable printers to simulate PANTONE® colors on white and dark (with white underlay) fabrics. This system comes with 13 gallons and 3 quarts of ink. That’s not only a great deal on ink, but it will give you the ability to cater to any of your customers ink color needs not to mention print thousands of shirts. FEATURES • Formulated to provide simulations of the PANTONE® Color Standards for light colored textile fabrics. • High Performance, Low Bleed (LB) plastisol formulated for Ultra High speed automatic printing. • Very creamy and short bodied, with low tack and for ease of printing, a greatly improved shear. • Well suited for high definition and resolution, fine detail and halftone printing. • Faster production speeds with less pressure, and can be printed through finer mesh counts. This System Includes: 7400 IC COLOR FORMULA GUIDE CD 7401LF WHITE 2-GALLONS 7402LF YELLOW (GS) 1-GALLON 7404LF YELLOW (RS) 1-GALLON 7406LF ORANGE 1-GALLON 7408LF RED (BS) 1-GALLON 7410LF PURPLE 1-GALLON 7412LF VIOLET 1-GALLON 7414LF BLUE (RS) 1-GALLON 7416LF BLUE (GS) 1-GALLON 7418LF GREEN 1-GALLON 7420LF BROWN 1-GALLON 7422LF BLACK 1-GALLON 7424LF FL. MAGENTA 1-QUART 7426LF FL. VIOLET 1-QUART 7428LF FL. GREEN 1-Quart IMPORTANT INFORMATION 1. In order to achieve the best color matching results using the UltraMix® 7400 Color System, the specified system primaries must be used. Using colors other than the specified primaries will produce inaccurate matching results. 2. Use 7401LF Mixing White in all formulas calling for white. Use 7422LF Black as the mixing black in all formulas calling for black. Using any other white or black will produce inaccurate results. 3. Use an underbase print when printing UltraMix® 7400 inks onto dark fabrics. Use 771LF, 774LF, 7031LF or 7034LF white as an underbase ink. To achieve a softer hand and faster production speeds, print underbase ink through finer mesh counts 230 to 305 t/in or 90 to 120 t/cm. 4. The UltraMix® 7400 inks are low bleed inks, not non-bleed inks. On some types of fabric, bleeding or dye migration may occur. Always test print the fabric to be printed before beginning production. Bleeding or dye migration may not occur right away. 5. Excessive squeegee pressure will drive the UltraMix® 7400 inks through the fabric being printed. Adjust squeegee pressure, angle and off-contact to insure proper shear and lay down of printed ink. Proper settings of squeegee, flood bar and off-contact will improve performance, improve screen life and squeegee durability. 6. Adding too much reducer or other additives to the UltraMix® 7400 inks may cause curing/fusing or increased dye migration problems. 7. UltraMix® 7400 inks are easy to print when compared to other inks and can be printed through finer mesh counts. This means less ink usage and faster production times, a real money saver. Using finer mesh counts also means a softer hand of the finished product. Application & Storage Information RECOMMENDED FABRICS: Light colored 100% cotton or cotton/polyester blends. Use an underbase for printing dark fabrics. INK APPLICATION: Colors should be printed without any modifications. If thinning is required, use IC Curable Reducer (1% to 5% by volume). SCREEN MESH AND EMULSION: 110 to 305 Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results. SQUEEGEE: 60-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge CURE TEMPERATURE: 325° (163°C) Entire ink film. Test dryer temperatures and wash test printed product before and during a production run. CLEAN-UP: Screen Wash 147 or any environmentally friendly plastisol screen wash. STORAGE OF INK CONTAINERS: Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed. SPOT FLASHING The UltraMix® 7400 inks will spot dry, with very low after flash tack, in 3 to 8 seconds depending on the spot dryer used. Too much heat / time may cause the ink to become sticky after flashing. Adjust flash unit accordingly. When spot drying, the ink should be just dry to the touch, with no lift off, but not totally fused. Totally fusing any of the flashed colors may cause inter-coat adhesion problems with the inks printed on top of the flashed ink. Final curing I fusing will occur in the dryer.  View International Coatings 7400 Online Mixing Formulation Software and Pricing Guide Recommended Upgrade Options Shown Below: In order to properly run a color matching system there are a few key tools you need to be sure you have. First you need a pantone book. The IC 7400 Color System matches off Coated Pantone colors, have a few books around is never a bad idea because it’s a great tool to help customers choose what color matches their needs. Remember, also show the customer the COATED Pantone Colors. If you don’t have a pantone color guide you can add on to this kit for only $85.  The other thing that you must have is a gram scale, this ink is mixed by weight and both the computer software as well as the formulation guide give you mixing ratio’s and calculations in order to properly mix and match your ink. We recommend getting a scale that can calculate as low as a 1/10th of a gram for the highest accuracy. We carry scales that can mix up to a quart or up to a gallon depending on the maximum quantity you would like to mix to. 
SP601 Elect. Digital Scale (600 Grams Capacity & 0.1g Readability) $220.92 (Makes up to a Pint) SP2001 Elect. Digital Scale (2000 Grams Capacity & 0.1g Readability) $287.28 (Makes up to a 1/2 Gallon) SP6000 Elect. Digital Scale (6000 Grams Capacity & *1.0g Readability) $221.67 (Makes up to a Gallon) This item ships from California and there is a 3-4 day processing time. Delivery times range from 4-10 days. For more accurate transit times, please call us at 800 314 6390.
|