|
AutoSTART Platinum Complete Shop w/ Automatic Press & Screen Printing + Package
![AutoSTART Platinum Complete Decoration Package]()
$83,602.57Reg.
$78,995.00 SALE
AutoSTART Platinum Package
(more than screen printing)
Looking for a one stop shop for a serious decoration business venture? With our
platinum package you not only have automatic screen printing at your fingertips,
you also have manual printing, sublimation, vinyl and chromablast transfers,
vinyl signage, and much more! Built around M&R’s Pneumatic Diamondback press
this package can handle just about anything you throw at it! We’ve also added a
manual press for smaller runs, allover prints, and testing, a complete Tri-Brid
4880 transfer and film output printer, Roland 24” Plotter, Heat Transfer Press,
Software, and all the products you could ever wish to start out with! All M&R
AutoSTART packages include free installation on the press & extended in house
training on screen printing from Ryonet (the customer is responsible for minimal
travel, lodging, and sustenance expenses for the techs). Training is an
important part of your success and we don't take it lightly, as a part of this
package you'll receive lifetime free admittance to any of or screen printing
classes, workshops, and tradeshows that we host and take part in throughout the
country.
Most screen printers start out with a small manual press which has the capability
to print around 100-150 pieces per hour. Not only do these shops have to learn the
process of artwork, creating film positives, exposing the screen, setting up the
job, but they also have to learn how to manually operate a press efficiently with
proper squeegee pressure and angles for different types of work and designs in order
to reach those manual maximum production numbers. They also have to spend all day
behind a press pulling a squeegee in order to produce the work or hire an employee
to do it for them. An automatic press handles the printing parameters consistently
for you and does all the hard production work efficiently and quickly with the capability
of producing over 500 pieces per hour. Of course you still have to learn artwork,
film output, and exposure, but once the press is setup, it works for you, it basically
will print as fast as you can load it! This creates an incredible advantage for
you! Lets say you get an an order for 2000 shirts. Manually this would take 4-8
hours to produce art, output film, and exposure screens, of course this will be
about the same time for you. However, with a manual press, this would take 3-4 days
to print (depending on how many colors). Automatically, you would be able to produce
2000 shirts easily in a 8 hour day. This opens the rest of your week up to go get
more of those 2000 shirt orders while your competition is still stuck behind the
press pulling the squeegee!
Plus to added to these automated capabilities you also have the ability to
produce full color short run items, customized apparel, and add specialty
promotional products. Create customized team jerseys with individual names
and numbers without having to burn screens and screen printing with the
Roland GX-24 plotter and our heat transfer vinyl kit. Produce
quality full color shirts for special occasions, events, presents, and much more
with the Sawgrass 4880 Chromablast transfer solution. Use sublimation to
decorate permanent jerseys, polyester clothing, mugs, mouse pads, plaques, tile,
and more! Even create signs, vehicle decoration, and window advertising with the
the Roland GX-24 plotter and standard vinyl. You're looking at an
extremely compressive package so take the time to carefully read through the
included items and watch the videos so you can find out more about how the
particular components work. As always, you have the ability to customize
this package anyway you'd like.
The AutoSTART Platinum Package
is a
complete great starter package with all the everything you need to operate a successful
printing and decoration business.
* 8 Color / 10 Station Diamondback Pneumatic Press
* Crate for Press Included
* Pre-Wiring for 9th Print Head at a later date Included in price
* Red Chili Quartz 20x24" Flash
* Crate for Red Chili Included
* Heat Wave Gas 16' Dryer (option to swap out for electric Radicure)
* Crate for Heat Wave Included
* Riley Hopkins WIN 6 Color 4 Station Manual Press w/ Joystick Registration
* Crate for Riley Hopkins Included
* MSP3140 Vacuum 1200 Watt Exposure Unit
* Crate for MSP3140 Included
* MREXREG-23x31 TriLoc Registration System by M&R
* Epson 4880 17" TriBrid Film Output, Sublimation & Chromablast System
* Stahls Hotronix 16x20 Digital Swinger Heat Transfer Press:
* SDX3 Smart Designer w/ Corel Draw Software
* LT2536 Light Table for Film Inspection
* GX-24 Roland Plotter
* Media Cad Heat Transfer Vinyl Starter Pack
* KDXL Backlit Washout Sink
* KDXL Crate Included
* 5 Gal Ryonet White
* Jet Black 5 Gal
* 7600 Gallon Lemon Yellow
* 7600 Gallon Golden Yellow
* 7600 Gallon Scarlet
* 7600 Gallon Royal Blue
* 7600 Gallon Kelly Green
* 7600 Graphics Purple:
* 7600 Navy Blue:
* Curable Reducer Gal :
* Gallon Chemical Kit w/ Spot Gun
* 12 x 23x31" 110 Mesh Screens
* 12 x 23x31" 156 Mesh Screens
* 6 x 23x31" 230 Mesh Screens
* 6 x 23x31" 280 Mesh Screens
* 6 x 23x31" 305 Mesh Screens
* 19" Scoop Coater
* 16x100 Pallet Tape
* Laser Temp Gun
* 12 Rolls of 2" x 55 yard Screen Tape
* 500 Black Test Pellons
* 500 White Test Pellons
* 2 Cans Screen Opener
* 6 Web Adhesive
* 6 Top Bond Mist
* 5 Days of Auto Training (on site, customer responsible for travel, lodging, and food) :
LIST: $83,602.57
Check out the advantages to automation!
Info video about when
to purchase and automatic press.
This Package Includes:
Diamondback 8 Color 10 Station (all pneumatic) Automatic Press.
Most owners of manual-press operations are constantly looking for ways to
justify upgrading to an automatic press because of the tremendous benefits
automation offers. Entry-level automatics can dramatically increase output,
giving shops the ability to take on large and last-minute jobs. They also
minimize labor costs and they largely eliminate the tedium and hard physical
effort involved in hand-pulling squeegees. In shops where the owner does much of
the printing, an automatic's high-speed production can free up time to work with
existing clients—and seek out new ones.
Unfortunately, those benefits often lost out to the cost factor—until now. By
relying on simplicity of design, strong standard-feature sets, highly-efficient
manufacturing processes, and volume production, M&R’s Diamondback has broken the
price barrier between you and your first automatic. The pneumatically-driven
Diamondback is available in 6 and 8-color models, with a maximum image area of
41 x 46 cm (16” x 18”) and a maximum pallet size of 46 x 56 cm (18” x 22”).
Diamondbacks can be ordered with an additional print head over the unload
station, turning the 6-color into a 7-color and the 8-color into a 9-color. The
press can also be optionally configured to allow the additional print head to be
added in the field.
Diamondbacks are available in base and enhanced configurations. Both models
feature pneumatically-driven print carriages, swiveling control panel arm with
touch-screen display, micro-registration, calibrated squeegee pressure
adjustment, standard M&R three-point pallet leveling bracket with quick release,
rear stroke length adjustment, new composite 41 x 56 cm (16” x 22”) pallets, and
M&R’s patented Revolver Print Program. Enhanced Diamondbacks add pneumatic frame
locks, pneumatic squeegee/flood bar locks, and pneumatic squeegee pressure
regulators. This package includes as we strongly recommend the "B" packaged
press w/ ALL Pneumatic Options. Pneumatics increase setup time efficiency by
four to five times. It's literally the difference of hand tightening down knobs
for 15-20 minutes OR flipping a switch and the job is done! In fact, over 99% of
ALL M&R diamond backs sold are purchased with "B" Package Pneumatic Options!
Includes: * Diamondback 8 Station/ 6 Color Factory Pre-Wire for Additional
9th Print Head at a later date.
Upgrade Options:
* 9 Color 10 Station "B" Pneumatic Head Options, Indexer, & Side Screen Holders:
($1920.95 Upgrade)
Features:
CAROUSEL/INDEXER
• Clockwise or counterclockwise rotation
CENTRAL OFF-CONTACT
• Permits fast, incremental single-lever adjustment of all stations
simultaneously
CERTIFICATION
• CE & UL compliant: Built to specifications established by the European
Committee for Standardization® (CE) and Underwriters Laboratories® (UL)
CONTROL CENTER
• Countdown program indicates when operator-set index count has been reached
• Independent print-start/print-finish setting automatically activates and stops
printheads at the beginning and end of production runs
• Multiple (1-9) print stroke capability
• Multi-print in the up position
• Onboard self-diagnostics
• Real-time production data
• Swiveling control arm with touch-screen display
INDEX SYSTEM
• Pneumatically-driven indexer
PALLET SYSTEM • Composite pallets
• Precise three-point pallet leveling system
• Tool-free pallet locator speeds pallet changeover
• Tool-free quick release pallet locks
PRINTHEADS
• Four-point off-contact adjustment
• Independent print/flood speed controls on each printhead simplify press setup
• Pneumatically-driven printheads
REGISTRATION
• Compatible with numerous registration systems, including M&R’s Tri-Loc® &
Double Tri-Loc® and Newman Pin-Lock®
• Enhanced front micro-registration adjustments with visual guides
REVOLVER PRINT PROGRAM
• Automatically operates individual printheads in programmed sequence and allows
multiple flashing without losing a printing position (U.S. Patent No. 5,595,113)
SCREEN CLAMPS & HOLDERS
• Adjustable side frame holders accommodate a wide variety of screen sizes
• Clamping system holds roller frames without special adapters
• Manual clamps hold frames tight and allow rapid screen loading (optional
pneumatic clamps on enhanced models: $1730.40 Uprade to "B" Package Cost)
SQUEEGEE/FLOODBAR
• Angle and calibrated pressure adjustments are independently set
• Front or rear print carriage stop position allows operator to leave screens
clear or flooded (great for water-based inks)
• Independent squeegee & floodbar speed adjustments
• Manual squeegee pressure regulator (pneumatic pressure regulators on enhanced
models)
• Manual squeegee/floodbar clamps (pneumatic clamps on enhanced models)
• Visual reference marks every 5 degrees simplify squeegee/floodbar angle
adjustments
STROKE LENGTH ADJUSTMENT
• Adjustable rear stroke length with tool-free adjustment maximizes print speed
Riley Hopkins 6 Color 4 Station Manual Press w/ Joystick Registration
Having a manual press in your shop is a very good idea,
a manual can handle your smaller production runs and
specialty prints such as pockets, sleeves, tags, and all
over prints. The 6 color Hopkins press has several
benefits over a standard 4 color press. Besides being
able to print 6 solid colors, you will also be able to
print full four color process prints with a white flash
plate for darker color garments. The Riley Hopkins press
with “Joy Stick” registration is simply the most user
friendly and cost affordable press on the market. It
allows you to easily set up multiple color jobs without
having to adjust micro registration knobs. It’s the
newest and most advanced thing to hit the screen
printing market concerning micro registration.
M&R HEATWAVE R SERIES: (50 dz per hr +)
Great for high production,
low cost energy consumption,
Water Based, Discharge, and
Plastisol Inks!
The HeatWave is M&R’s most
affordable gas textile dryer,
bridging the gap between M&R’s
infrared dryers and the Sprint
line of high-performance gas
dryers. With superior design and
unrivaled quality, HeatWave
offers exceptional performance
in a compact gas dryer. HeatWave
features M&R’s high-efficiency
gas-dryer technology, 91 cm
(36”) belt width, 259 cm (8’ 6”)
heat chamber length, and a new
control-panel that uses icons
instead of text to control dryer
operation.
Not only does HeatWave have the
highest production capacity in
its class, it’s also the most
energy efficient. Heavy-duty
thermal insulation prevents heat
from migrating into the
workplace, while CoolSkin™
technology leaves the dryer skin
cool to the touch. Fast cure
rates and high product
throughput maximize dryer
capacity and minimize per-unit
cost. Available in liquid
propane (LP) or Natural Gas
(NG), the high-performance
burner is designed with excess
capacity that exceeds
consumption rates under normal
operating conditions. Separate
blowers control circulation and
exhaust, and a high-volume
forced air system quickly brings
the chamber to the desired
temperature, speeding the start
of production. Process
temperatures and set
temperatures are controlled
digitally. Temperature
consistency is ensured by a
fuzzy-logic controller, which
responds to ambient temperature
changes by keeping chamber heat
within +/-1° of target
temperature at the thermocouple.
When readings fall outside
those settings, a temperature
monitor issues an audible alarm.
Entry and exit openings are
adjustable, and crowned rollers
ensure positive belt tracking.
An automatic shutdown sequence
keeps the blower and belt
running until the chamber has
cooled. Aggressively priced and
impressively designed, HeatWave
is a perfect choice for small to
mid-size shops.
AIR HANDLING
• Enhanced airflow accelerates
drying/curing
• Exhaust blower evacuates up to
33 980 l/min (1200 cfm)
• Heat efficiency system reduces
operating expenses by using
outgoing combustion gas to heat
incoming air
• High-volume circulation blower
reduces energy costs
• Stainless steel filter slides
out for easy cleaning
• Two separate dedicated blowers
(circulation and exhaust)
CERTIFICATION
• CE & UL compliant: Sub panel
built to specifications
established by the European
Committee for Standardization®
(CE) and Underwriters
Laboratories® (UL)
• CSA Certified and built to
meet or exceed AGA & CGA
standards
CONTROL CENTER
• Automatic shutdown sequence
keeps the blower and belt
running until the chamber has
cooled
• Temperature monitor issues
audible alarm when readings fall
outside user-specified
parameters
CONVEYOR SYSTEM
• Conveyor belt is made of
heat-resistant, Teflon®-coated
fiberglass
• Crowned rollers for positive
belt tracking
• Driven by a reliable,
heavy-duty, variable-speed DC
motor
DESIGN & CONSTRUCTION
• Adjustable entry/exit openings
• Air-cooled cabinet ensures
long life for electrical
components
• Bearings are designed for high
speeds and high temperatures
• Circuit breakers allow easy
reset
• Low-profile design makes it
easier to see over the dryer
ENERGY EFFICIENCY
• Burner designed with excess
capacity that exceeds
consumption rates under normal
operating conditions
• CoolSkin™ technology leaves
the dryer skin cool to the touch
• Fast curing rates and high
product throughput maximize
dryer capacity and minimize
per-unit cost
• Fuzzy-Logic controller ensures
consistency by keeping heat
within 1° of target temperature
at the thermocouple
• HeatWave is the most
energy-efficient dryer in its
class
• Heavy-duty thermal insulation
prevents heat from migrating
into the workplace
• Pressurized vector air knives
provide consistent and uniform
temperatures throughout the
drying chamber
• Process temperature and set
temperature are displayed and
controlled digitally
HEAT CHAMBER
• Burner is available for liquid
propane (LP) or natural gas (NG)
• Direct-fired burner is
maximum-rated at 125 000 Btu
• Double-wall construction
• Galvanized steel interior
• Modular gas train simplifies
maintenance
PRODUCTIVITY
• HeatWave has the highest
production capacity in its class
50 Dozen Per hour
WARRANTY, SERVICE AND SUPPORT
• 24-hour hotline is staffed 365
days a year
• Access to M&R’s Training
Center
• One-year limited warranty
|
Belt Width
|
|
Burner Input
Maximum 4
|
|
Burner Width
|
|
Electrical
Requirements 1
|
Exhaust Blower
System 2,
3 |
|
Gas Input Size
|
|
Heat Chamber
Length
|
|
Heat Chamber
Width
|
|
LP/Natural Gas
Input Pressure
|
|
Overall Length
|
|
Shipping Weight 5
|
|
Standard
Infeed/Outfeed
Length
|
|
|
Additional Options (please
call for custom orders)
ELECTRIC VERSION: If you would prefer an electric dryer vs.
gas, the Radicure 36" dryer can be substituted in this package for no additional
charge.
|
Belt Width |
|
Electrical Requirements 1 |
Exhaust Blower
System 2, 3 |
|
Heat Chamber Length |
|
Overall Length |
|
Overall Width |
|
Radiant Panels |
|
Shipping Weight |
|
Standard Infeed Length |
|
Standard Outfeed Length |
|
|
M&R RED CHILI QUARTZ FLASH
The freestanding Red Chili uses sealed tungsten
filament quartz lamps, and works with both automatic and
manual presses. Instant-on lamp technology conserves
energy by reverting to standby when the press is idle,
and its lamps are divided into three zones, which can be
operated independently or in any combination. Its
adjustable optical sensor switch can be positioned on
either side of the flash, allowing the Red Chili to
match the rotation direction of the press. The sensor
doesn’t require a signal from the press, making it easy
to move the unit between print heads or presses without
time-consuming setup. The sensor also makes the Red
Chili ideal for manual press flashing. The curing module
is mounted on top of a height-adjustable floor stand.
The stand’s hand crank makes height adjustments easy.
The curing module is powder coated, and the stand is
coated in chip-resistant black oxide. M&R’s Red Chili
seamlessly bridges the gap between automatic-only and
manual-only quartz flash cure systems.
SIZES:
|
|
|
Electrical Requirements 1
|
|
Size
|
|
|
MSP 3140 Exposure Unit
(by Nuarc)
MSP 3140 features NuArc’s
patented instant-start power technology, which reduces glass temperature, power
consumption, and environmental heating effects. With a 79 x 102 cm (31" x 40")
maximum screen frame size, it’s an ideal choice for those entering automatic
printing and for quality-conscious printers in manual environments. MSP 3140 is
designed for those seeking superior performance at an affordable price. NuArc’s
computerized and programmable integrator/controller ensures precise vacuum
duration and lamp output compensation. MSP 3140 is also simple to operate. The
entire exposure process—from vacuum drawdown through screen exposure and vacuum
release—is accomplished with a single keystroke.
NuArc’s unique manifold system ensures intimate contact by drawing vacuum evenly
around the perimeter of the blanket frame. A 1200-watt multi-spectrum
metal-halide lamp, with its ability to retain fine lines and dots, produces
exposures of exceptional quality. MSP 3140 can be located in areas housing
unexposed screens because the light source and vacuum frame are enclosed, and
the exposure lamp can’t be turned on while the blanket frame is open.
All equipment from The M&R Companies is built with M&R's unsurpassed attention
to detail and commitment to quality, durability, innovation, and design
excellence, and is backed by M&R’s unparalleled 24-hour access to service,
support, and premium parts. It’s no wonder M&R is the first name in screen
printing equipment.
BLANKET & VACUUM
• Advanced design eliminates the need for a vacuum hose connection to the
blanket
• Exceptionally flexible and resilient material ensures intimate contact and
blanket longevity
• Gas shocks simplify blanket frame opening and closing
• Oil-free pump is fast, quiet, and efficient
• Unique manifold system ensures intimate contact by drawing vacuum evenly
around the perimeter of the blanket frame
• Vacuum release system (U.S. Patent No. 5,481,333) instantly releases vacuum
CERTIFICATION
• CE & UL compliant: Built to specifications established by the European
Committee for Standardization® (CE) and Underwriters Laboratories® (UL)
CONTROLLER/INTEGRATOR
• Computer controlled and fully programmable
• Job Recall™ allows storage and recall of numerous vacuum and exposure values
• Light integrator ensures precise exposures
• Touch-screen panel with alphanumeric display
DESIGN & CONSTRUCTION • 9.5 mm (3/8") thick optically-clear plate glass
• 99 cm (39”) working height for no-step access
• Frame latches are made with state-of-the-art material for durability,
longevity, and operator comfort
• Fully-enclosed, heavy-duty all steel cabinet
• Light-Loc™ automatically turns off the light source if the blanket frame is
opened
• Removable covers provide easy access to components to clean or replace any
serviceable item
• Self-contained design speeds production by allowing placement in darkrooms
• Ships fully assembled and ready to deploy
• Square tubular steel welded frame
EXPOSURE AREA
• 79 x 102 cm (31" x 40") maximum screen frame size
• Compatible with the Tri-Loc® Rapid Registration System from M&R
LIGHT SOURCE
• 1200-watt multi-spectrum metal-halide instant-start lamp produces fast,
efficient exposures
• Exposes all emulsions: direct, capillary, and indirect
• Lamp drawer makes lamp easy to access and change
• Patented (U.S. Patent No. 4,339,692) instant-start lamp and rapid recovery
power supply eliminate warm-up and idling times, saving energy and reducing heat
build-up
• Point-light source provides maximum collimation and optimum coverage to hold
fine lines and dots
WARRANTY, SERVICE AND SUPPORT
• 24-hour hotline is staffed 365 days a year
• Access to M&R’s Training Center
• One-year limited warranty excluding blanket, glass, and lamps
OPTIONS
INSPECTION LIGHT: Part # MRAOPT-MSP-LT ONLY $145
• Allows the operator to check for alignment, dust, and pinholes before exposing
screens
• Yellow safelight turns on and off automatically when the blanket frame is
raised or closed
Electrical Requirements: 110 V, 1 ph, 18 A, 60 Hz, 2 kW or
208/230 V, 1 ph, 7.4/5.7 A, 50 Hz, 1.3 kW
Maximum Screen Frame Size: 79 x 102 cm (31" x 40")
Overall Size: (H x W x D) 102 x 130 x 119 cm (40" x 51" x 47")
Shipping Weight: 325 lbs
Vacuum Frame Size: 94 x 117 cm (37" x 46")
Wattage: 1200 watts
Epson 4880
Tri-Brid System (17" Wide Roll Format)
Exclusively from
Ryonet, the Epson 4880 Tri-Brid that can do everything at once with one
printer. Just a few weeks ago you would have to buy three separate printers to
do what the Tri-Brid can now accomplish with just one. Using our unique
combination of software and inks this system allows you to print quality opaque
half tone film positives, vibrant ChromaBlast heat transfers for 100% Cotton,
and brilliant sublimation transfers for 100% polyester and a variety of
substrates like coffee mugs and plaques. The 4880 has several advantages over
the R1800 and smaller printers. It incorporates a fully enclosed cartridge
system, has more robust print head, can print in a larger format, and faster
print drivers. No matter what you looking to do, with the Tri-Brid System you
can branch out to multiple markets, retain more business, and make more money.
Perfect for the any screen print, sign, or embroidery shop! View exclusive
details below!
Epson 4880 Printer
AccuRip Software
Sawgrass 1111116 4880 Hybrid Software
SubliJet IQ 4880 110ml CMYK Cartridges.
30031412P1- Black Slot 1
3003142P2 - Cyan Slot 2
3003143P3 - Magenta Slot 3
3003144P4 - Yellow Slot 4
Sawgrass ChromaBlast 4880 110ml CMYK Cartridges
3014141P5 - Black Slot 5
3014142P6 - Cyan Slot 6
3014143P7 - Magenta Slot 7
3014144P8 - Yellow Slot 8
13x19" Tru Pix Sublimation Paper (100 Pack)
11x17" ChromaBlast Transfer Paper (100 Pack)
11x17" WP R-FILM (100 Pack)
8.5x14" WP R-FILM (100 Pack)
Specialty Printing DVD
Four Color Process DVD
SEE HOW EASY
SUBLIMATION IS HERE IN THESE VIDEOS:
M&R Patented TRI-LOC Registration System
Tri-Loc Registration
(included):
No other registration system offers the ease of use and accuracy of M&R’s
patented Tri-Loc and Double Tri-Loc, M&R’s revolutionary Rapid Registration
Systems. And Tri-Locs are key components in System Integration™. By designing
products that work together seamlessly—products like Tri-Loc & Double Tri-Loc,
NuArc’s Tri-Light exposure units, Chameleon® and Sidewinder™ Manual Presses, and
all M&R textile automatic presses—M&R equipment provides faster setup, improved
quality, increased productivity, and enhanced profitability.
Tri-Locs are compatible with all M&R textile presses, and can be used with wood
frames, aluminum static frames, and roller frames. Tri-Locs are affordably
priced, extremely cost effective, and have no moving critical registration
points to wear out. Tri-Locs employ precision-milled stop points to ensure that
the operator can precisely match the registration on the exposure unit with the
registration on the press. Double Tri-Loc is M&R’s twin-screen version. Screens
properly exposed on one side of the Double Tri-Loc will be in sync with screens
exposed on the other side, dramatically reducing the time devoted to exposing
screens. And by combining NuArc’s Tri-Light™ Exposure System with the Double
Tri-Loc, operators can burn two same-size screens at once.
Master registration frames, available in numerous adjustable and fixed sizes,
fit most popular screen frame sizes. Custom sizes, individual Tri-Loc
components, and complete Tri-Loc & Double Tri-Loc startup kits are also
available. Cost-effective and easy to use, Tri-Locs can reduce setup time by as
much as 95 percent. Unprecedented simplicity and unsurpassed accuracy make
Tri-Loc and Double Tri-Loc the ideal choice for those who refuse to compromise
on quality—and don’t have time to waste (U.S. Patent No. 5,953,987).
ROLAND GX-24 24" Vinyl Plotter
Heat transfer vinyl
& Roland Plotter How-To Video
With the CAMM-1 GX-24 vinyl cutter, you can create stand-out signage for your
business in minutes. The GX-24 includes a host of advanced features that make it
both powerful and easy to use. Even novices can master its operation in no time.
Roland's CAMM-1 vinyl cutters have been recognized worldwide as the industry's
most cost-effective and reliable tools for producing banners, vehicle graphics,
store displays, point-of-purchase materials, informational signs, backlit
displays, flock heat transfers and almost any other vinyl cutting application.
Powered by a digitally controlled servo motor for speed, precision and
reliability, Roland CAMM-1 technology is now better than ever.
Vinyl Heat Transfer Starter Pack: 10 Assorted Rolls of both standard
and specialty heat transfer vinyl.
SMART DESIGNER SOFTWARE w/ CORELDRAW
 
DK20S Swing Away Heat Press
The Digital Knight DK20S is a 16x20 inch swing-away heat transfer press. The
DK20S combines a heavy-duty solid steel industrial grade pressing framework with
accurate and easy to use electronics to provide the operator with the best
possible features and equipment needed for today's various heat transfer
applications.
This press is our most popular 16x20 machine. It is well known in the industry
as the top-end robust workhorse of all swing away heat presses.
Features:
Fully digital temperature control
Automatic digital timer
Digital pressure/height gauge
70 Programmable presets
Solid steel welded framework
Interchangeable tables
Super Coil-Microwinding™heater technology
Accommodates materials up to 1" thick
Temperature readout accuracy +-2°F
User selectable end-of-cycle alarms
Records number of pressing cycles done
Teflon-coated 3/4" thick heat platen
Lifetime warranty on heat platen
3-year warranty on control
1 year warranty on entire press
Light Table Film Inspection Box 25x36"
For use w/ Tri-Loc Registration System
KDXL Back Lit Washout Sink
Screen prep, Image wash out, and reclaiming are all key factors to maintain a clean
shop. A washout sink is a key tool in your screen shop because it allows you to
contain your messes and helps prevent contamination. The "back light" feature of
this booth will also insure crisp image washout and save you from missing the fine
details often missed during image washout. The KDXL Backlit Washout Booth
Measures 36”W x 24”L x 69”H
Complete
Chemical & Supply Package
Chemical Kit B Includes:
• 1 Gallon CCI DXP Dual Cure Emulsion
• Container of CCI ER80 Emulsion Remover Concentrate (makes 1 gallon)
• 1 Qt CCI Nutralyze Screen Degreaser
• 1 Qt CCI Renu-It Haze/ Ghost Remover
• 1 Gallon Screen Wash 147 Ink Wash-Up
• 3 Spray Bottles
• 3- Scrub Cleanup Pads
• 2 Can of CCI Spray Adhesive
• 1 Can Screen Opener
• Glass Cleaner
• 1 Spot Cleaning Gun w/ Fluid
Complete Screen & Ink Supply Package
* 5 Gal Ryonet White
* Jet Black 5 Gal
* 7600 Automatic Formulation Ink from IC
* 7600 Gallon Lemon Yellow
* 7600 Gallon Golden Yellow
* 7600 Gallon Scarlet
* 7600 Gallon Royal Blue
* 7600 Gallon Kelly Green
* 7600 Graphics Purple
* 7600 Navy Blue
* Curable Reducer Gal
* 12 x 23x31" 110
Mesh Screens
* 12 x 23x31" 156 Mesh Screens
* 6 x 23x31" 230 Mesh Screens
* 6 x 23x31" 280 Mesh Screens
* 6 x 23x31" 305 Mesh Screens
* 19" Scoop Coater
* 16x100 Pallet Tape
* 2" x 55 yard Screen Tape
* 500 Black Test Pellons
* 500 White Test Pellons
* 2 Cans Screen Opener
* 6 Web Adhesive:
* 6 Top Bond Mist:
M&R Install &
Training
* Includes all Crate Fees & M&R Installation: 2 day, one day installation
and one day training. (Typically the customer is responsible for minimal M&R tech travel, accommodation,
and meal expenses, additional installation days are also the responsibility of the
customer, this can range upwards of $2000. With this package, RYONET
PAYS ALL OF THE M&R TECH STANDARD TRAVEL EXPENSES)
Shop must be configured and sign off sheet signed before install takes place.
M&R does not setup or wire conveyor equipment, a qualified electrician must be obtained
by customer for proper wiring to both the conveyor and flash dryer prior to press
installation.
FREE In
house Training
A Ryonet tech will travel to your facility shortly after the M&R install and training
takes place. For 5 Days we will walk you through artwork, film output, shop configuration,
job setup, and production. This will help insure that you are started on the right
foot in your business. We recommend you have a few jobs in line for production so
we can help you start making money immediately!
Ongoing Technical Support
RYONET: We provide free phone tech support for life!
Ryonet is open 7am - 6pm M-F PST with a toll free number to help you out with questions
you may not know both now and in the future!
M&R SERVICE AND SUPPORT
• 24-hour hotline is staffed 365 days a year
• Access to M&R’s Training Center
Additional Equipment You'll Need: The M&R Diamondback press requires
sufficient air to operate. Ryonet recommends at least a 25 CFM / 100 PSI compressor compatibility
(7.5-10 Horse Power), you will also need a chiller/dryer to accompany the compressor
so you insure the press is fed with dry fresh air to insure the life of the air
cylinders in the press. We recommend that you try to find a local compressor company
to work with so that there is a warranty and service plan available on short notice
in case your compressor goes down. For any questions or help finding a compressor
please contact a Ryonet sales rep at 800-314-6390.
Training: (the customer is responsible for minimal travel, lodging, and
sustenance expenses for the Ryonet techs).
Shipping: This equipment is very large and ships freight. Total weight is
over 8000 lbs.
Production time on this equipment is approx 4-5 weeks. The sooner you get
your order in, the quicker the equipment will ship.
|