|
Epson C120 - Sublimation Mug Transfer Package
![C120 Sublimation Mug Transfer Package]()
$619.95
This complete mug decoration package is designed for the simple creation of mugs using a sublimation process and special ink. Personalised and printed mugs are the perfect to offer to your customers. They serve multiple purposes, for one these mugs are attractive, customers can utilize them, and if you have your company name and logo printed on them, they will have something to remember you by. It is difficult to ignore a message especially when that message is reinforced with a stunning image. The sublimation process is different than standard ink transfers because instead of using a carrier sheet to take the ink over to the shirt or item, sublimation ink actually becomes a permanent part of the item.
Information about the Mugwraps for sublimation..
With this package you can create professional long lasting mugs out of your home, shop, or small business!
Also, if you add on a standard heat press, you also have the ability to decorate shirts, jerseys, and other types of apparel!
Looking for an
entry-level cost-effective solution for sublimation printing? SubliJet IQ for
the Epson C120 is your answer. Portable and lightweight, this little package
provides you with the speed and resolution you need to produce exceptional
prints. And by utilizing the QuickConnect II bulk ink system, you can reduce
your cost per print to under a dollar! With this package you can sublimate
everything from T-Shirt to Mugs, start impressing your customers and retaining
business today!
Package Includes:
Includes Brand NEW Epson C120 CMYK Printer.
SubliJet IQ CMYK Ink Cartridges. (Upgrade to the Quick Connect System w/
110ml Bags of CMYK Inks, review cost charts below for savings. Item No.
SGC120SubQC Upgrade Cost: ONLY $320)
100 Pack of the True Pix 8.5x11" Sublimation Transfer Paper (larger format)
36: 11 oz. White Sublimation Mugs
2: Cactus Oven Mug Wraps for 11 or 15 once mugs.
1: Roll of 1/2" Heat Tape
Epson Driver Software For Optimal Print Settings
Complete Instructions For Use and Setup & Sublimation DVD
The Price Is Right
This cost-effective solution allows you to get started in sublimation and grow
your business accordingly. Choose the QuickConnect II bulk-ink system option for
lowest cost per image! (QuickConnect with over 10 times
the amount of ink for only $380 more!!!)
COST SAVINGS W/ QUICKCONNECT SYSTEM:
Average Imaging Cost (ink and paper)
|
Image Info |
C120Cartridge |
C120 QC* |
Soft L’ink Tshirt
7.5” x 10” image size |
$2.25 |
$0.65 |
Unisub Plaque
5” x 7” image size |
$1.05 |
$0.35 |
Ceramic Mug
3” x 3” image size |
$0.60 |
$0.25 |
Add Sublimation 6 More Mug Wraps
Mug Wraps For Only $126 ($21 Each, Reg $23)
If you wish to do flat items such as shirts, jerseys, plaques, mouse pads, and coasters you will also need a heat transfer press, if you don't have one already take a
look at our options below for adding a heat transfer press to this package. We
recommend looking at a digital heat press but you can get started as low as
$414.75 with our Mighty Press Lite.
Mighty Press - Lite 11"x15" Heat Transfer Press: $414.75
Mighty Press - Clam Heat Transfer Press 15"x15" : $729.75
Mighty Press Digital - Clam Heat Transfer Press 16"x20": $1,102.50
Hotronix 16" x 20" Clam Heat Transfer Press: $1295.00
SHIPS FROM WASHINGTON
Instructions for use:
1) Gather up your mugs, Mug Wraps, heat tape, transfers, gloves,
tightening device, and scissors.
2) Cut 2 pieces of heat tape, approximately 1" long and apply to either end
of your transfer, leaving 1/2" sticking out. For best results, the transfer
should be sized so it covers the top of the mug to the bottom and handle to
handle
3) Center the transfer on the mug and tape one edge down onto the mug. Use
your thumb to apply pressure along the transfer to keep it snug to the mug.
4) Push the second piece of tape firmly onto the mug.
5) Center the mug in the Cactus Wrap, slide the catch under the handle and
fasten it over the receiving bar. Tighten with a 7/6" nut driver or drill. We
recommend the
Ryobi 3/8” Clutch Driver purchased at Home Depot for $39.97. We use a clutch
setting of 3 or 4 which gives good even pressure without over tightening the
wrap, which is key to long wrap life and successful transfers.
6) Use the pressure as stated above with the Ryobi drill (clutch setting of 4
or 5). You can also hand tighten with nut driver. Once snug, turn ½ to 1 full
turn to give a little more pressure. You should see a slight bow in the center
where the white material overlaps.
7)Pop the mug and wrap into a toaster (or larger) oven UPSIDE DOWN.
Convection ovens work best and you can usually put 3-5 in at a time. We
recommend the
Hamilton Beach 31197. Bake for approximately 15-18 minutes at 380 - 400 F if
using Cactus Ink Jet coated mugs, 350 - 365 if using Versa coated mugs.
8) Put on your gloves and remove the mug.
CAUTION THE MUG IS EXTREMELY HOT!
Tight cotton gloves and looser leather gloves over the cotton offers even more
protection. Loosen the Cactus Wrap and take it off the mug
9) NOTE: Keep your gloves clean because dirt can transfer into the mug coating
while hot.
You now have a couple options:
a) Remove tape and transfer while hot, but be careful. .
b) Allow to cool for 1 minute then remove the tape and transfer.
To expedite the cooling process you can let mug soak in cool water once unwrapped.
Maintenance of mug wrap.
- Periodic lubrication of threads is required for maximum
performance (High temp lithium grease - typically sold at auto parts stores)
- Lubrication of the rubber with a Teflon spray will help
the wrap move smoothly along transfer paper
- DO NOT over tighten to achieve longevity
of Cactus Wrap
- To clean debris off contact surface, use soft bristle
brush. DO NOT scuff rubber surface
- If cleaning is needed, use mild dishwashing soap.
|